EcoFlow RIVER 2 Max vs Jackery Explorer 1000 Plus

“Startup/Shutdown Amps on my Vevor DH, not quite 1 year old yet, requires around 12A. Make absolutely sure any power station you buy can output more than DC 10A because A LOT of them don't. My Ecoflow River2 Max does not output more than 10A so I can't use DC off of it to run my DH. I reverted to using a 30Ah LiFePO4 and it will run my DH just fine for about 7-8 hours at an outside ambient temp of 25f to a low of 17f, is what I experienced and the battery was around 20%. That was with settings where inside my tent was around 51f - 55f. I do have both solar and DC-DC charger but will be looking to upgrade to a LiFePO4 battery in the 200Ah range.”

“The Jackery kit won't work, but not for the reason you stated. If you look at the technical specifications listed for the unit, it states that the AC outputs are 120V. You mentioned that the pump control box says it's 230V. So the Jackery kit won't be able to output the voltage to match what you need. You misunderstand how the breaker for you pump is set up/works. A double 20A breaker is designed to trip if the current passing through it exceeds 20A. Most US residential electrical services are split phase 240V supplies. That means you have 2 hot wires and a neutral wire entering your main electrical panel. The purpose of the double circuit breaker is to look at the current traveling though both hot wires to your 240V motor, and if one of them exceeds the breaker's rating (in this case 20A,) it disconnects power from both hot wires to the motor at the same time.”